Fixation of Cement and Steel Rates for the month of June, 2015
GOVERNMENT OF TELANGANA
A B S T R A C T
R&B – SOR for all
Engineering Departments – Fixation of Cement and Steel Rates for the month of June, 2015 –
Orders – Issued.
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TRANSPORT, ROADS AND BUILDINGS (R.I) DEPARTMENT
G.O.RT.No. 364 Dated:
12 .08.2015. Read
the following:
1. G.O.Ms.No. 02, I&CAD Dept., Dated:
10.07.2014
2. From the Engineer- in - Chief (IW),
I&CAD Department, Lr.No.ENC/IW/P&M/EE-I/DEE-2/AEE-4/C-S/Vol-3/15, Dated:
03.07.2015.
***
O R
D E R :
The Engineer-in-Chief
(IW) I&CAD, in his letter 2nd read above, has informed that in
terms of orders issued in G.O.1st read above the Sub-Committee of
Engineers which met on 25.06.2015 has finalized the rates (inclusive of all
taxes) of Cement & Steel for the month of June, 2015 and requested to
approve the same.
2. Government, after careful
examination of the matter hereby approves the rates (inclusive of all
taxes) rates of cement & steel, for the month of June,
2015 as detailed below subject to satisfaction of the rates are in tune with
changes in CPI (Consumer Price Index), by the sub committee of Engineers:-
Sl.
No.
|
Material
|
Rates
fixed for June, 2015
(Rate
for 1 MT.)
|
1
|
CEMENT
|
|
a.
|
Ordinary Portland Cement (43/53 grade)
|
Rs.6,200/-
(Rupees Six Thousand Two Hundred Only)
|
b.
|
|
Rs.6,000/- (Rupees Six Thousand only)
|
c.
|
|
Rs.5,800/- (Rupees Five Thousand Eight
Hundred only)
|
2
|
STEEL
|
|
a.
|
6 mm M.S.Rods
|
Rs.40,000/- (Rupees Forty Thousand only)
|
b.
|
M.S.Flats
|
Rs.40,000/- (Rupees Forty Thousand only)
|
c.
|
Mild steel, structural steel, i.e
Angles channels & I-sections
|
Rs.40,000/- (Rupees Forty Thousand only)
|
d.
|
M.S.Plates
|
Rs.41,000/-(Rupees Forty One Thousand only)
|
3
|
TMT /HYSD bars
|
|
a.
|
Fe-415
conforming to IS 1786-2008
|
Rs.38,000/- (Rupees Thirty Eight Thousand
only)
|
b.
|
Fe-500/500D/550D
|
|
i)
|
From Primary Producers like TATA, SAIL,
VSP, Jindal as approved by Ministry of Steel
|
Rs.40,000/- (Rupees Forty Thousand only)
|
ii)
|
BIS approved
secondary producers conforming to IS 1786-2008 must have valid license and
well established TMT process of either Thermax, Tempcore, Evcon Turbo &
Turboquench.
|
Rs.38,000/- (Rupees Thirty Eight Thousand
only)
|
4.
|
HSCRM
Steel bars(Fe-500)
|
Rs.40,000/-
(Rupees Forty Thousand only)
|
|
Public
Health Items
|
|
5.
|
P.C.drawn
wire/H.T. Wire
3 mm
|
Rs.59,000/-
(Rupees Fifty Nine Thousand only)
|
6.
|
P.C.drawn steel wire/HT wire
4 mm
|
Rs.59,000/-
(Rupees Fifty Nine Thousand only)
|
7.
|
H.R.Sheet in coils 1.6 mm
|
Rs.45,000/- (Rupees Forty Five
Thousand only)
|
8.
|
H.R.Sheet in coils 2.0 mm
|
Rs.43,000/- (Rupees Forty Three Thousand
only)
|
9.
|
Foundry Grade Pig Iron (2.00 to 2.24)
(Excluding Taxes)
|
Rs.26,000/- (Rupees Twenty Six
Thousand only)
|
3. All the Heads of Departments/Corporations,
Universities, Agencies dealing with PWD works shall take action accordingly.
4. This
order issues with the concurrence of Finance Department vide their, U.O.No.9542/292/A1/EBS.X/15,
Dated: 3.08.2015.
(BY ORDER AND IN THE NAME OF THE GOVERNOR OF TELANGANA)
SUNIL SHARMA
PRINCIPAL SECRETARY TO GOVERNMENT
Post a Comment